Previous Lesson

1.2 What you need to start


AGAR Products to Use

  • STR-36
  • DEMOLISH
  • ULTRASTRIP
  • FIRST BASE
  • 3D GLOSS


Sealing Equipment

  • Polish mop & wringer bucket – or – Polish fringe mop & watering can
  • Buffing machine pad
  • Wet floor sign

Stripping Equipment

  • Dust mop or broom
  • Stripper mop
  • Scraper
  • Black handpads
  • Wet floor signs
  • Rotary scrubbing machine black pad
  • Cardboard
  • Rinse mops
  • Wringer bucket
  • Wet vaccum ‘or’ Autoscrubber
  • Masking tape
  • Plastic sheeting

Please Note When Stripping & Sealing:

  • Always use a fresh mop for both stripping and sealing.
  • First Base must be used so the film will bond to the floor and not flake off.
  • Avoid sealing very cold floors (below 9˚C). If you must seal a cold floor, lay very thin coats at least one hour apart.

Coverage Tip:
On average, one litre of an Agar sealer will cover 55 square metres of floor (one coat only). In practice, the first coat will require more sealer, and the last coats will require less. Porous floors will take more sealer.