DO NOT buff the floor. Put up barriers to keep people off the floor being polished
Mop on one coat of FIRST BASE. This can be done with a clean polish mop and wringer bucket (which is best) or a clean fringe mop and watering can. Spread the pour line as soon as possible after pouring. Lay the sealer up to the edges. Lay sealer as thinly as possible – never in pools as it will take a long time to cure. Do not walk on floor until it is dry.
Must wait 1 hour for FIRST BASE to dry on any floor.
Let the first coat dry. It must not only be dry but also tack free, or not sticky, before laying the second coat. Test by placing your hand on the floor. Wait an extra 10 minutes after it is touch-dry before laying the next coat.
If floor is still dull and porous, mop on a second coat of FIRST BASE, but this time stay 30cm (12 inches) away from edges, along walls and furniture. The second coat, if being applied with the bucket and mop, should be laid at 90 degrees to the way the first coat was laid.
Login
Accessing this course requires a login. Please enter your credentials below!